Page Comparison

Left click and drag

Middle click and drag

Right click and drag

Scroll wheel

Left click on the compass widget

-

<CTRL> + Scroll wheel

Toggle grid

<Enter> - Toggle Including Mouse-Point in Result

<Backspace> Remove Last Point

Make a screenshot and choose a resolution required

Review and modify main settings of the selected block(s).

Note that the settings available differ for Bench and Flitch level blocks.

Flag to excludes unwanted solids from the Reserves. Hatching is shown in Legend and set in Setup > Settings > Hatch Patterns.

Excludes smaller solids from being displayed. Threshold values are set in Setup > Settings > Discard Thresholds.

Prevents a solid from being edited.

Type of the Blast (Trim / Contour / Ramp / FreeDig / Production), which includes the selected dig solid.

Block Model/Grade Control.

Image Removed

Image Added

Add a numeric value to set an Azimuth. This will cause the block to be split in to two blocks, “upper” and “lower” in the azimuth direction. Changes populated in this field will be displayed in Production Scheduler/Tactical Scheduler Viewports.

Level Names hierarchy: Reserves - Mine - Pit - Stage - Bench - Blast - Flitch - Dig Solid.

Dig Solid identifier can be edited, if desired.

Solid Properties, added and configured by user in the Setup > Blast Properties, more details see here.

Quantitative characteristics of selected solids, such as volume, surface area, perimeter.

Labels

Image Removed

Image Added

• Toggle an eye icon to display or hide labels.

• Select a text to display in the label from the Text dropdown, or configure custom labels through the gear icon. Examples and instructions on how to create Custom Blasts Labels can be found here.

  • Orange labels are custom configured.

  • Blue labels are pre configured by Alastri.

  • Black labels are standard.

• Optionally, specify preferred text back and fore colors, as well as font and size

Blasts/Digs

Image Removed

Image Added

• Choose what type of the solid level you wish to display (Blasts or Digs). Note that depending on whether Blast or Dig display type is selected, different properties become available for editing.

• Toggle an eye icon to display/hide polygons. Optionaly, change their opacity.

• Toggle an eye icon to display/hide solids. Optionaly, change their opacity.

• From the Shading dropdown select a standard or pre configured blasts/digs shading. Alternatively, create your own. Examples and instructions on how to create Custom Blasts Shadings can be found here.

Construction Lines

Toggle to display/hide construction Lines and Extrusions.

Block Model

• Toggle an eye icon to display or hide Block Model.

• Optionally, select block’s height and scale.

  

• Use Constraints to hide parts of the block model based on some criteria, such as material type or grade threshold. Examples and instructions on how to create Block Model Custom Constraints can be found here.

• Select Block Model Shading from a preloaded list of automatic shadings. Alternatively, add to this list by configuring custom shading sets. Examples and instructions on how to create Block Model Custom Shading can be found here.

Cash Flows

• Toggle to display or hide Cash Flow values. Note that to have this section available option Enable Single Destinations must be flagged in the Settings step. Examples and instructions on how to create use Single Destinations functionality can be found here.

Other Entities

Options to display/hide, or change a color of the following entities:

• Bench Above/Bench Below,

• Flitch Above/Flitch Below,

• Blast Designs,

• Silhouette,

• Expanded Silhouette.