...
Pan |  | Middle click and drag |
|---|---|---|
Rotate |  | Right click and drag |
Zoom |  | Scroll wheel |
Zoom Extents |  | Left click on the compass widget |
Vertical Exaggeration | - | <CTRL> + Scroll wheel |
Grid |  | Toggle grid (only in plan view) |
Measure Distances |  | Function for measuring the distance between marked points. <ENTER> - Toggle Including Mouse-Point in Result <BACKSPACE> - Remove Last Point |
Place Drone |  | Places a drone into the Viewport which can be flown around.
|
Cross-section |  | Drag and rotate in the viewport to define the breadth and bearing of the section plane. |
Capture Screenshot |  |  Save the viewport capture in a suitable resolution for later reference in reports or presentations. |
Scale bar |  | Use the scale bar to estimate distances and scale in the viewport. |
...
The Information panel is the main area to review Polygons and Reserve information, interact with crossCross-section tool, review charts and configure and export Reports.
...
Cross-Section tab
Click in the Cross-Section panel to view cutaways of the conformance solids.
Press the cross-section icon from the top toolbar to begin.
Click and drag on the screen to define the breadth and bearing of the section plane.
To reset the cross-section line, simply click in the desired location and start stretching the A<-->B line, or click the minus icon in the upper left corner of the bottom panel.
Zoom, pan and vertically exaggerate the view inside the Cross-Section panel.
Step forward and backward with the blue up/down arrow icons in the Cross-Section panel.
Toggle layers in the Surfaces and Domains panels to display different Production or Schedule surfaces or Domains.
Set the step size as required.
...
Use the Export button to export Reserves data to Excel, Text or CSV format.
...
...
Table tab
The Report Table tab is where you can review the reports configured in the Table Options step. Configured reports will appear in the “Table Options” Panel Table panel.
...
| Info |
|---|
The settings in Setup > Settings > Options may cause greater or lesser degrees of accuracy in the solid calculations. Each scheduled component in the Report table contains an Error row—the row — the greater the error, the lower the accuracy of the result. Aim to keep Error-values lower than 1%. This can be achieved with tighter reserving grid sizes and lower minimum height thresholds. |
...
Select polygon/bench from Benches panel to display a chart for it. You can select single RL or multiple using <CTRL> and <SHIFT> keys.
Use the Chart Field dropdown to select data to display (will be shown on the left).
Hover the mouse cursor over bars to see detailed information.
Press Copy to Clipboard button to save the current chart view.
| Info |
|---|
|
...