...
An operation set can be copied with the files swapped out for a different outcome.
Icon | Description |
|---|---|
| Blue Plus : Create a new blank Operation Set. All operations must be individually added. Double Page : Copy an existing Operation Set including all existing operations. If the same operations are being used to create a phase, swap out the required files. Red X : Remove highlighted Operation Set. Up / Down arrows : Reorder Operation Set by moving highlighted set up/down the list. |
Operations Pane
Click the Add Operation button to display a list of the available operations.
Operation | Description | ||
|---|---|---|---|
Create Solid Above All Surfaces | If multiple surfaces are overlapping, this option will use the upper triangulated surface of the overlapping surfaces as the base for the solid being created. Then projects this surface up to create a closed solid. | ||
Create Solid Above Any Surfaces | Will use the lower triangulated surface of the overlapping surfaces as the base for the solid being created. | ||
Create Solid Below All Surfaces | Will use the lower triangulated surface of the overlapping surfaces as the top for the solid being created. | ||
Create Solid Below Any Surfaces | Will use the upper triangulated surface of the overlapping surfaces as the top for the solid being created. | ||
Note |
| ||
Create Solid From Polygons | Creates a solid from a polygon. These polygons can be digitised in graphics or imported.  | ||
Create Solid Above Plane | Define a plane by typing in an X, Y, Z value. An upper surface is projected above this plane and a closed solid is triangulated. | ||
Create Solid Below Plane | Define a plane by typing in an X, Y, Z value. An upper surface is projected below this plane and a closed solid is triangulated. | ||
Union Solids | Joins solids into the same layer. These solids can be intersecting, but may be free standing. | ||
Intersect Solids | Intersects solids. The result is that part that is common to all imported solids. Multiple solids may be imported here. | ||
Subtract Solids | Outersects solids. The result is that part of the Inclusive solids that has has had the Excluding solids removed from it. | ||
Translate Solid or Surface | Type in an X, Y, Z value to define the translation. Existing triangulated surface is translated to the new location. | ||
Reduce Complexity | This functionality can be used to remove shards left over after another operation (Example: Subtract solids). Input the solid with multiple solids, give a minimum acceptable volume, all the minor solids with a volume below that minimum value will be removed. | ||
Upper Surface | An open surface is created of the upper part of the input solid(s). | ||
Lower Surface | An open surface is created of the lower part of the input solid(s). | ||
Clip Surface by Polygon (Exclude Outside) | Intersect a surface with a polygon(s). This can be digitised in graphics or imported.  | ||
Clip Surface by Polygon (Exclude Inside) | Outersect a surface with a polygon(s). This can be digitised in graphics or imported. | ||
Append Surfaces | Append Surfaces to one another. |
Graphics Screen
Icon | Description |
|---|---|
Blue Plus : Create a new blank Operation Set. All operations must be individually added. Double Page : Copy an existing Operation Set including all existing operations. If the same operations are being used to create a phase, swap out the required files | |
Icon | Description |
 | Add Operation : Select the required operation from the drop down list. These are outlined in the following table. Red X : Remove highlighted a selected Operation Set. Up / Down arrows : Reorder Operation Set Operations by moving highlighted set selected operation up/down the list. |
Graphics Screen
Blue Plus icon to import files into the softwareTriangle : Run the Operation set | |
 | Create folder to organise files in the pane. |
Delete File / folder. Highlight files to be deleted and select delete button. Using the CTRL/Shift keys multiple files may be selected | |
Enable file to made visible or Invisible | |
Lock or unlocked for editing | |
Show triangle edges | |
Triangulated file (Surface/Solid) | |
Points file | |
Click on colour swatch to select triangulation colour and level of transparency. Drape Images over triangulations here. |
...