...
Gap filling material should be waste or backfill material, if it could be anything else, discuss with the geologists who prepared the Block Model.
Select a parcel from a list of parcels preconfigured in the resmodel, or create a new one.
| Note |
|---|
The gap filling material must be selected from the dropdown list. If in the Parcel field you enter a custom value other than the listed parcels (e.g., "0"), the Designer tab and the subsequent plan setup will have that component (i.e., "0" in this example) along with the components created when generating the Reserves model. |
Volume is always = 1.
Specify default DryTonnes and WetTonnes density, and moisture, if applicable. You can also set grades etc as well, if known.
If gaps are present and gap fill is not used, the schedule will apply zero tonnes for this mining area.
In this example, wherever there is missing any block model information when it gets interrogated against phase solid, the created Gap Filling Preset is going to be used.
...