RU 🇷🇺
| Tip |
|---|
In the Settings section you may set units of measurements, options and thresholds to use in the project. |
| Table of Contents |
|---|
Enter all global settings to change the behavior of the project.
Units | Select the units of measurement which match your site coordinate system and local standards. |
|---|---|
Use the Quick Set dropdown to select Metric or Imperial units of measurement. | |
 | |
Options | Configure parameters of your model. |
|---|---|
Use Extensions | Toggle use of custom add-ins, such as external database queries and Grade Control data. |
Use Block Model | Toggle use of block models for reserving. |
Fill Block Model Gaps | Option to fill voids in block models with a default material. |
Enable Dig Plans | Allow blast solids to be subdivided into dig blocks. |
Enable Single Destinations | Force one material type per dig block, for grade control blocks. |
Use External Grade Control Data Source | Connect to external grade control database. |
Block Model Expand Distance (m) | Visible block models are clipped to the Expand Distance around the current selection. |
Maximum Grade Block Overlap (%) | Error threshold for overlaps of imported grade control polygons. |
Error Finders | Specify thresholds to control error messages in the Error List in the Designer tab. |
|---|---|
Volume Threshold (Minimum Volume) | Populates the Error List (in the Designer tab) with warnings for trivial blast volumes. |
Sliver Threshold (Area / Perimeter) | Populates the Error list (in the Designer tab) with warning for boomerang-shaped blasts (batter trims). |
Discard Thresholds | Specify thresholds to filter out small blocks. |
|---|---|
Minimum Volume (m3) | Filters out solids below the minimum volume. Any solid whose volume is less than the defined value will be discarded. The maximum value is capped to 1000. |
Minimum Area (m2) | Filters out solids below the minimum area. |
Sliver Threshold (Area / Perimeter) | Filters out solids below the minimum width. |
Sliver Maximum Area Threshold | For Alastri personnel only, field to be left as it is. |
Minimum Volume for Export | Filters out solids below the minimum volume. |
Hatch Patterns | Select a pattern from dropdown to outline different areas for phase exclusion, blasts or grade control. |
|---|---|
Phase Exclusion Hatch | Set a pattern to show outside the polygon in Phase Exclusion Areas step. Area which is outside of the polygon is called “Phase Exclusion Area”. |
Invert Phase Exclusions Hatch | Toggle to show the pattern inside the polygon. Area, which is inside the polygon, is called “Phase Exclusion Area”. |
Designer - Editing Blast Hatch | Set a pattern to cover viewport in the Designer tab. Double click on the blast - it should clear pattern for blast selected. |
Designer - Grade Control Hatch | Set a pattern to cover grade control blocks. |
Designer - Excluded Hatch | Set a pattern to show for the bench selected in the Designer tab when Force Excluded. |
Infrastructure | Infrastructure module related settings. Requires custom scripts. For details please contact alastrisupport@micromine.com | |||||
|---|---|---|---|---|---|---|
Use Infrastructure | Flag to enable use of the infrastructure module, to account for some critical infrastructure areas such as heritage, environmental and bores. Requires custom extension scripts.  . 
|