Preconfigured views can be generated for the defined conformance regions inside the Polygon Options step. The preconfigured views will then be used in the automated report process. Two views can be used specified which are Viewpoint and Cross-Section.
Viewpoint
The Viewpoint image can either be a 2D image (top-down) or a 3D image (rotated) of the selected Polygon.
Setting the Viewpoint
Selected the relevant Polygon from the listed polygons.
Inside the top viewport, orientate the viewport to the desired position.
Select the black downwards pointing arrowhead located in the Viewpoint column.
Select the “Save” option.
Clearing the Viewpoint
Selected the relevant Polygon from the listed polygons.
Select the black downwards pointing arrowhead located in the Viewpoint column.
Select the “Clear” option.
Activating the Viewpoint
Selected the relevant Polygon from the listed polygons.
Select the black downwards pointing arrowhead located in the Viewpoint column.
Select the “Active” option.
The viewport will orientate itself to the saved position.
Cross-Section
The cross-section image is a 2D cross-sectional image of the selected Polygons.
Setting the Cross-Section
Selected the relevant Polygon from the listed polygons.
In the toolbar located above the top viewport, select the cross-section button.
Click and hold the left mouse button inside the top viewport and move the cross-section arrow across the selected polygon.
The cross-section will then be displayed in the bottom viewport.
Use the Step Size box and blue up and down arrows to change the step size of the cross-section arrow and move it across the polygon.
6. Once the desired view has been established, select the black downwards pointing arrowhead located in the Cross-Section column.
7. Select the “Save” option.
Clearing the Cross-Section
Selected the relevant Polygon from the listed polygons.
Select the black downwards pointing arrowhead located in the Cross-Section column.
Select the “Clear” option.
Activating the Cross-Section
Selected the relevant Polygon from the listed polygons.
Select the black downwards pointing arrowhead located in the Cross-Section column.
Select the “Active” option.
The viewport will orientate itself to the saved position.
Polygon-Specific Visibility Settings
Several additional items can be displayed or hidden to help digest the conformance result. The items specified are specific to the selected Polygon.
Setting | Description |
|---|---|
Layers | Layers loaded here will be part of the Viewpoint image in the generated Conformance Report. An elevation offset can be specified to raise or lower the layer. |
Surfaces | The surface set layers are used for the selected polygon. The surface will be part of both the Viewpoint and Cross-Section images if enabled. |
Domains | The individual domain solids generated from the intersection of the production and schedule solids. If enabled, solid will be part of both the Viewpoint and Cross-Section images. |