TS. Haulage Configurations

In the step Haulage Configurations step user sets the default haulage configurations for the model.

Open

Haulage Configurations step overview

Export Key Column from Chrono Reports

Enable this option if you want to export key column from Chrono reports.

Export Units Column from Chrono Reports

Enable this option if you want to export units column from Chrono reports.

Default Truck Type

For schedules using Optimise Products mode (enabled in Configuration Options setup step), any overflow will be calculated using the Default Truck Type, set in this field. 

Default Loader Type

For schedules using Optimise Products mode (enabled in Configuration Options setup step), any overflow will be calculated using the Default Loader Type, set in this field. 

Haulage Materials

Reserves tab > Data panel > gear icon > Mutex Parcel Subsets > (create or edit) Haulage parcels

Some users have tens or hundreds of parcel types that they wish to schedule, but only need an "ore" and "waste" truck payloads in Haul Infinity. In order to save on data entry, the Mutex Parcel Subsets can be used to map all parcels into a simpler category set, which is then passed to Haul Infinity by way of the Haulage Materials selector. 

Haulage Quantity Type

Haulage Quantity Type is always set to wet tonnes, so that no conversion is required to match the bucket and tray payload units in Haul Infinity > Setup > Parameters.

Fill Sequencing Type

Set Fill Sequencing Type defaults to "Travel Time", since "Distance" may choose a less fuel-efficient elevation profile.

Process Optimised Stockpiles Last

Processing the rehandle transactions last will concentrate truck overflow in the rehandle fleets, instead of spreading it across multiple production fleets. For example, if a digger is shared between the pit and the ROM, "Process Optimised Stockpiles Last" flag will cause it to overflow in the rehandle fleet instead of the production fleet.

Use Serial Blasting Delays

Set up blasting so it can only run on one blast at a time. This approximates a bomb crew that cannot be on more than one shot at once.

Drilling Hatch Pattern

Choose from the dropdown the hatching style which represents drilling areas in the Animation tab.

Error Messages

Haulage Configurations errors may be thrown if there are mismatches between the Tactical Scheduler data and the Haul Infinity data. 

Open

Common Haulage Configuration errors

Loader Type not found

Check for mismatches between:

• ATS > Setup > Loader Types, and

• Haul Infinity > Setup > Loaders.

Truck Type not found

Check for mismatches between:

• ATS > Setup > Truck Types, and

• Haul Infinity > Setup > Trucks > Models.

Material Type not found

Check for mismatches between:

• ATS > Reserves tab > Data panel > gear icon > Mutex Parcel Subsets > Haulage parcels, and

• Haul Infinity > Setup > Materials.

Terminal not found

Check for mismatches between:

• ATS > Setup > Waste Dumps/Stockpiles/Crushers, and

• Haul Infinity > Network > Nodes > Waste Dumps/Stockpiles/Crushers.

Records were not matched to blocks

Run the following command in Haul Infinity:

• Haul Infinity > Scheduler > Import Blocks from Scheduler.

Records matched to unconnected blocks

Check for unconnected blocks in:

• Haul Infinity > Network > Blocks.