In the Limits step set the safe operating limits by truck type.
TKPH Limits
Haul Infinity automatically adds TKPH delays to cycle times to keep tires below the TKPH limit.
TKPH limits can be found in the tire manufacturer’s handbook.
Engine Loads
Optionally update engine loads for more accurate fuel burn predictions.
Speed Limits
These are the default speed limits that apply on all unsigned roads.
Haul Infinity will always choose the lowest speed between the defaults and road signage.
Cornering Speed Limits
Haul Infinity automatically assigns speed limits to corners based on the inputs in this table.
For angles greater than ninety degrees, consider dropping the speed limit to 10 km/hr.
Cornering measures deflection rather than radius, because we are dealing with digitized points.
Loaded Speed Limits
Haul Infinity automatically assigns speed limits to loaded trucks based on the inputs in this table.
For grades steeper than -9.5%, consider dropping the speed limit to 20 km/hr (or second gear equivalent).
For grades steeper than +9.5%, consider dropping the speed limit to 10 km/hr (or first gear equivalent).
Unloaded Speed Limits
Haul Infinity automatically assigns speed limits to unloaded trucks based on the inputs in this table.
For grades steeper than -9.5%, consider dropping the speed limit to 40 km/hr (or fourth gear equivalent).