Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Rapid Reserver contains tools for automatically generating blast masters on a single bench, or across the entire mine.

Description of each option see below:

Select a level from the dropdown where to generate automatic blast shapes: Selected/Current/Visible Blasts/Benches Dlitches and Digs.

For a better understanding of the Automatic Blasts Generation tools, and for practical guidance, please proceed with the exercises provided in the RR. Designer tab Exercises section.

Remove Existing Designs

Flag this option to clear existing linework from the specified level.

  • If flagged, no need to use the Delete Designs tool.

  • If not flagged, new shapes will be applied over existing ones.

Generate Ramp Shots

Flag this option to automatically create a closed polygon around a section of ramp that is less than a user-defined depth.

  • Enter the Ramp Shot Minimum and Maximum Angles (in degrees).

  • By default, ramp shots are displayed in blue.

Generate Trim Shots

Flag this option to automatically create closed polygons around a section of Bench/Flitch against the wall.

  • Note that for Trim Shots to be generated, the wall area must be defined in the Wall Control Designs step.

  • Set Trim Shot Length and Width (in meters).

  • By default, ramp shots are displayed in green.

Generate Internal Shots

Flag this option to automatically create closed polygons around of Internal (Production) Shots.

Fitted Blasts

Generating blasts following the Bench/Flitch contour.

Straight Grid

Straight gris across the Bench/Flitch.

Size X and Size Y

Set the Size X and Size Y to the blast dimensions.

Note that for medium or long-term planning (ATS), size of the blocks should be relatively large, while for shorter planning horizons (APS) they can be smaller in order to provide more details when sequencing mining.

The smaller the size of the blocks, the longer it takes to generate and process them. Keep this in mind when working with larger mines models.

Bearing

Set the Bearing to match the pit orientation (for example, 120°).

Bench Offset X and Y

Create from Corner/Center

Create Shots grid from a defined corner/center.

  • Click to start drawing the grid.

  • Choose a bearing and first axis size.

  • Choose a Y axis size.

  • Left-click to confirm. The Generate Blasts window will reopen. Edit, or click OK to confirm.

Cell Merge Proportion

Specify proportion to merge adjacent blocks, ie, if some are too small.

Generate Contour Shots

Flag this option to automatically create closed polygons around of shallow Contour Shots.

  • Specify the Minimum Contour Area (in meters).

  • By default, ramp shots are displayed in purple.

  • No labels