RU 🇷🇺
The Setup tab contains a series of steps that must be completed to create a valid project. To proceed to the next step and run your model you’ll be prompted to complete every step of this tab.
All steps of the Setup tab are listed below. Press on each one following the specified order to get more detailed information.
Color Codes
When setting up a project for the first time, all setup tasks need to be performed in the specified sequence. You cannot proceed to the red marked step without confirming the previous one. During the subsequent work with the configured project, you can return to any of the steps, but after making changes you will need to rerun all the tasks below in the list. This is because changes you make in a single step can affect settings in related tasks and need to be reviewed or adjusted.
Completed and confirmed setup steps are marked with a green check mark. You can return to such steps at any time and in any sequence.
Steps in the course of which an error has been made are marked with a yellow triangle. Read its description at the bottom of the screen and solve it to proceed to the next steps.
Outstanding steps that need to be completed in order to continue with the project setup and enable the remaining steps and tabs are marked with a red circle.
Steps that are currently being worked on are marked with an empty gray circle.
Adding Notes
In the top right corner of the Setup Task panel there is a button for adding Notes.
When you click this button, the Notes panel appears on the right side of the screen, where you can write notes for each setup step.
You can also add pictures to your Notes.
To hide this panel, click the cross in the upper right corner. This will not delete the entered notes, but will close the panel and move it back to the left side of the screen as a folder icon.
A mini Note icon will be shown beside the setup task step if the setup task includes a note.