HI. Truck Limits

TKPH Limits

Bridgestone Limit (tkph)

Michelin Limit (tkph)

Haul Infinity automatically adds TKPH delays to cycle times to keep tyres below the TKPH limit.

• TKPH limits can be found in the tyre manufacturer’s handbook.

• Michelin provides a temperature coefficient for calculating TKPH at different temperatures. This coefficient can sometimes be negative if the average haul speed is below 5 kilometers per hour. Essentially this means that there are no TKPH delays.

• Haul Infinity calculates TKPH for every possible source and destination and then matches that with the limit set in this setup task. If the vehicle's calculated TKPH is greater than the TKPH limit for a haul in that period, then it will introduce delays (or it will slow down the truck to match the TKPH limit).

Speed Limits

Cornering Speed

Used to slow down trucks at intersections and switchbacks. Corners are measured by the angle of deflection and the lookahead distance.

Haul Infinity automatically assigns speed limits to corners based on the inputs in this table.

For angles greater than ninety degrees, consider dropping the speed limit to 10 km/hr.

Grade Speed

Default speed limits that apply on all unsigned roads.

A truck is never allowed to exceed its loaded or unloaded speed limits.