В шаге Infrastructure Items (Объекты инфраструктуры) пользователи могут назначать свойства и визуально просматривать объекты инфраструктуры. Ниже приводится описание компонентов данного шага.
Панель Items
Область Types
В списке Types (Типы) отображаются все типы объектов инфраструктуры, определенные в рамках проекта. Все данные, оотображаемые данные обновляются в зависимости от выбранного типа.
Кнопка | Описание |
|---|---|
 | Экспорт полигонов зоны в панель слоев Layers. Этот процесс выполняется автоматически по завершении этого шага. |
 | Экспорт перевернутых оболочек карьера и отвала для каждого объекта инфраструктуры. Экспортированные оболочки можно использовать вне данного модуля для прогнозирования положения новых карьеров и отвалов с учетом приближенности к объектам инфраструктуры. |
Область Properties
Обасть Properties — это табличная структура, в которой перечислены отдельные элементы инфраструктуры (в зависимости от типа объекта инфраструктуры). Эти элементы можно создать через сценарии или добавить вручную с помощью кнопок панели инструментов. Для каждого элемента в таблице можно задать несколько свойств.
Свойство | Описание |
|---|---|
Name | Name of the infrastructure site, i.e. Heritage Object 1234, Bore 1 |
Category | A relevant category |
RL | The RL at which the item resides (optional) |
Custom Properties | Any custom properties which were defined for the selected infrastructure type |
Another table is displayed on the far right-hand side, and its contents are based on the subtype of the selected infrastructure type.
Subtype - Subject to Approval
Column | Description |
|---|---|
Name | Zones defined under the Infrastructure Type |
Distance | Expansion radii for infrastructure zones. Different radii can be set up to model the different impact zones have on pit and dump solids. |
Approval Date | The date at which zones cease to exist |
Subtype - Immutable
Column | Description |
|---|---|
Name | Zones defined under the Infrastructure Type |
Distance | Expansion radii for infrastructure zones. Different radii can be set up to model the different impact zones have on pit and dump solids. |
Subtype - Bore
The table will be disabled for bores as there is only one zone whose expansion radius is 0m.
Toolbar buttons
Several buttons are shown throughout the items panel. The functionality of each button is outlined below.
Button | Description |
|---|---|
 | Add or remove infrastructure items. If the Infrastructure Type is scripted, these options will be disabled. |
 | Reposition the selected infrastructure within the list. If the Infrastructure Type is scripted, these options will be disabled. |
 | Resets the RL of the selected infrastructure item(s) to the default value. |
 | Sets the RL of the selected infrastructure item(s) to a user-defined surface elevation. The surface to drape polygons onto will be selectable once the button is clicked. |
Viewport and Toolbar
All the mine components are be displayed in the viewport.
In the table below all toolbar icons are listed with description and hotkeys available.
Selection |  | Left click and drag |
|---|---|---|
Pan |  | Middle click and drag |
Rotate |  | Right click and drag |
Zoom |  | Scroll wheel |
Zoom Extents |  | Left click on the compass widget |
Vertical Exaggeration | - | <CTRL> + Scroll wheel |
Show/Hide grid |  | Toggle grid |
|---|---|---|
Measure Distances |  | <Enter> - Toggle Including Mouse-Point in Result <Backspace> Remove Last Point |
Screenshot |  | Make a screenshot and choose a resolution required |
Snap |  | Options to snap to points, lines, intersection, angles, triangle points and triangle edges |
|---|---|---|
Create Polygon |  | <P> - Create Polygon <Q> - Toggle Closed Polygon <CTRL> - Snap to 15 degrees Angles <SHIFT> - Snap to Integer Polar Distance <ALT> - Enter Coordinates Manually <ENTER> or <F2> - Continue <ESC> - Stop |
Create Construction Line |  | <D> - Create Construction Line |
Move Points |  | <F> - Move Points |
Add Points |  | <A> - Add Points |
Delete Points |  | <S> - Delete Points |
Move Segment |  | <M> - Move Segment |
Copy Segment |  | <C> - Copy Segment |
Delete Segment |  | <N> - Delete Segment |
Join |  | <J> - Join Segment |
Break Segment |  | <B> - Break Segment |
Rotate Segment |  | <R> - Rotate Segment |
Offset Segment |  | <O> - Offset Segment |
Trim |  | <T> - Trim |
Intersect |  | <I> - Intersect |
Quick Extend |  | <Q> - Quick Extend |
Clear Path |  | - |
Trace Path |  | - |
Import Construction Lines |  | Import from .arch_d, .str, .dxf, .obj, .shp format |
Export Construction Lines |  | Export to .arch_d, .str, .dxf, .obj, .shp format |
Layers Panel
The Layers/Overlays panel is common to all Alastri products. Description of this panel items and their functions see here.
History tab
History tab
The History tab is located in the bottom right corner of an application. Click through the history list to see different past states and revert to any o