RR. Settings

In the Settings section you may set units of measurements, options and thresholds to use in the project.

Enter all global settings to change the behavior of the project.

Units	Select the units of measurement which match your site coordinate system and local standards.

Units	Select the units of measurement which match your site coordinate system and local standards.
Use the Quick Set dropdown to select Metric or Imperial units of measurement.

Options	Configure parameters of your model.

Options	Configure parameters of your model.
Use Extensions	Toggle use of custom add-ins, such as external database queries and Grade Control data.
Use Block Model	Toggle use of block models for reserving.
Fill Block Model Gaps	Option to fill voids in block models with a default material.
Enable Dig Plans	Allow blast solids to be subdivided into dig blocks.
Enable Single Destinations	Force one material type per dig block, for grade control blocks.
Use External Grade Control Data Source	Connect to external grade control database.
Block Model Expand Distance (m)	Visible block models are clipped to the Expand Distance around the current selection.
Maximum Grade Block Overlap (%)	Error threshold for overlaps of imported grade control polygons.

Error Finders	Specify thresholds to control error messages in the Error List in the Designer tab.

Error Finders	Specify thresholds to control error messages in the Error List in the Designer tab.
Volume Threshold (Minimum Volume)	Populates the Error List (in the Designer tab) with warnings for trivial blast volumes.
Sliver Threshold (Area / Perimeter)	Populates the Error list (in the Designer tab) with warning for boomerang-shaped blasts (batter trims).

Discard Thresholds	Specify thresholds to filter out small blocks.

Discard Thresholds	Specify thresholds to filter out small blocks.
Minimum Volume (m3)	Filters out solids below the minimum volume. Any solid whose volume is less than the defined value will be discarded. The maximum value is capped to 1000.
Minimum Area (m2)	Filters out solids below the minimum area.
Sliver Threshold (Area / Perimeter)	Filters out solids below the minimum width.
Sliver Maximum Area Threshold	For Alastri personnel only, field to be left as it is.
Minimum Volume for Export	Filters out solids below the minimum volume.

Hatch Patterns	Select a pattern from dropdown to outline different areas for phase exclusion, blasts or grade control.

Hatch Patterns	Select a pattern from dropdown to outline different areas for phase exclusion, blasts or grade control.
Phase Exclusion Hatch	Set a pattern to show outside the polygon in Phase Exclusion Areas step. Area which is outside of the polygon is called “Phase Exclusion Area”.
Invert Phase Exclusions Hatch	Toggle to show the pattern inside the polygon. Area, which is inside the polygon, is called “Phase Exclusion Area”.
Designer - Editing Blast Hatch	Set a pattern to cover viewport in the Designer tab. Double click on the blast - it should clear pattern for blast selected.
Designer - Grade Control Hatch	Set a pattern to cover grade control blocks.
Designer - Excluded Hatch	Set a pattern to show for the bench selected in the Designer tab when Force Excluded.

Infrastructure	Infrastructure module related settings. Requires custom scripts. For details please contact alastrisupport@micromine.com

Infrastructure	Infrastructure module related settings. Requires custom scripts. For details please contact alastrisupport@micromine.com
Use Infrastructure	Flag to enable use of the infrastructure module, to account for some critical infrastructure areas such as heritage, environmental and bores. Requires custom extension scripts.