Steps:

1. Open current model in SCTP 1.1.100
2. Export block model Fields and Mappings from original model
   1. Go to Reserves Configuration and click on save icon.
      
   2. Export blockmodel fields from the first blockmodel in the list. This will save to an "abmf" file.
      
   3. For each blockmodel do the same for "Export Mappings". creating an "abmm" file for each blockmodel.
   4. Come out of Reserves Configuration by clicking the "Cancel" button.
3. Export surfaces (optional)
   1. If you don't have the original surface files or created the surfaces using surface lab export the required surfaces from the layer panel on the conformance tab.
      
4. Export Polygons.
   1. Select and export each polygon to dxf, str, or arch_d.
      
5. Export Conformance Domains.
   1. Click on the configure icon in the Conformance Domains section.
      
   2. Export Domain Mapping by clicking on Save icon.
      
   3. This creates a "ctpdmf" file
6. Close the current model and open SCTP 2.0 and select File\New.
7. Working your way through the Setup tab.
8. In Settings.
   1. Select "Use Block Model"
      
   2. Click on "Play" icon.
      
9. In "Block Model" click on "New".
   
   1. Click on "Add" icon under Block Models to import each bintab/bmf/csv into new resmodel.
      
   2. Import field mapping "abmf" file by clicking on folder icon in icon bar.
      
   3. Now import each blockmodel's "abmm" file. Make sure have the correct blockmodel active when select the corresponding file.
   4. Once you have imported all the blockmodels and the corresponding 'abmm" parcel mapping file. Click on the "Generate" button and save the resmodel.
10. Click the play button and in the Bench Templates Setup.
    1. Create the bench templates according to what your bench heights are for the pit areas to be reported.
    2. In the layers panel on the bench template tab you can import the surfaces for later use.
11. Click the play button to step to Domain Mappings.
    1. Click on the folder icon and import your domain mapping file.
12. Click the play button and step to Polygons.
    1. Click on the "Add" and as each mine area corresponding to each polygon be calculated
    2. Fill out the options section. You can drag and drop from the layer panel into the Production and Schedule surfaces sections
    3. Once you have created a Polygon definition for each reporting area (defined by a polygon) click on the play button.
13. In the Polygon Geometry Setup.
    1. For each area import by clicking on the folder icon and select the corresponding dxf/str/arch_d file or draw a polygon to limit the reporting area.
    2. If importing polygons you may need to close the polygon by using the "join" option.
       
       
14. Click the play button and  the model should now be set-up
15. Save the the model.