The Calendar tab is the primary area allowing a manually control of your scheduling process.
Specify applicable input parameters for equipment, rates, and set incentives and constraints to optimise the schedule results, such as the following.
(You may customise the dashboard to display more or less categories in Configure Scheduling Dashboards dialog).
Crushers
Enter the crusher capacity into Schedule > Calendar > Crushers. This may be defined by a rate or a flat target, depending upon what availability types have been specified in Setup > Crushers.
Loaders
Enter the excavator numbers and time usage into Schedule > Calendar > Loaders. This may be defined by a rate or a flat target, depending upon what availability types have been specified in Setup > Loaders.
Trucks
Enter the truck numbers and time usage into Schedule > Calendar > Trucks. This may be defined by a rate or a flat target, depending upon what availability types have been specified in Setup > Trucks.
Steps
If you have defined variable step ratios in the Steps Logic, then they will appear in Schedule > Calendar > Steps.
Failure to input step ratios may result in a schedule fault. (For more details see TS. Schedule Not Working).
Drills
If you are using Drills, then enter the drill parameters into Schedule > Calendar > Drills.
Agents
If you are using Loaders as Agents option, then enter the Agent Rate into Schedule > Calendar > Agents. (For more details see TS. Loaders, Fleets and Agents).
Product Specifications
If you are using Optimise Products mode, then enter the cash flows and targets into Schedule > Calendar > Product Specifications.
