TS. Opening Inventories

Owned by iarmstrong
Last updated: Feb 14, 2023
2 min read

RU

Overview

Use the Opening Inventories step to set starting stockpile volumes, tonnes and grades. 

Opening Inventories step overview

Stockpile Inventories

  • Stockpiles populated with data are colored blue.

Stockpiles Inventories not populated vs populated

Control and Navigation

  • Switch between the stockpiles in the list to view the data for each of them.

  • Use <CTRL> and <SHIFT> buttons to display data on the selected parcels, or all of them.

  • Press Clear Selected Parcels to reset parcels to zero.

  • Press Clear All to reset all stockpiles to zero.

Make sure that all product fields are populated in a stockpile, do not leave zeroes if there should be a value!

Editing Stockpile Inventories

  1. You can manually edit stockpiles inventories by typing or pasting required values in the Inventories fields, or

  2. Import stockpiles inventories from SPCSV file, as described below.

Exporting SPCSV

  • To get your stockpiles inventories data, navigate to Schedule > run the Schedule > Reporting tab.

  • You can preview inventories data in the default Inventory Report (shown in blue bold).

  • Press Export Special button and select “Stockpiles After Period (SPCSV)” option.

  • Choose an Export Period and press OK.

  • Name the exported file as required.

  • The exported file will be saved in “.spcsv” format.

Importing from SPCSV

  • In the Opening Inventories step, press Import from SPCSV to populate stockpiles inventories with your site stockpile current state data.

  • Specify a path to the exported .spcsv file.

  • Stockpiles with populated data will be displayed in blue and you’ll see available data in the table on the right.

Important note on modifying SPCSV file

If you need to make changes to the exported SPCSV file:

  1. Change file extension from “.spcsv” to “.csv”.

  2. Edit it as required and save.

  3. Rename to back “.spcsv”.