TS. Preschedule

Owned by iarmstrong
Nov 30, 2021
2 min read

The Preschedule step is used to modify blocks to their anticipated state at the start of the schedule. 

Preschedule step overview

Manual Preschedule

Blocks can be manually prescheduled by selecting them (either in the block tree on the left, or box-selected in the viewport) and clicking the flag  icon in the toolbar.

Enter the percentage of material remaining in the prescheduled block(s)

To manually preschedule blocks:

  1. Use the Visibility Mode button to toggle between viewing all blocks, or only the currently selected blocks in the tree.

  2. Select blocks in the viewport.

  3. Press the flag icon from the toolbar.

  4. Set percentage remaining in the block.

  5. Tick Remove Full Prescheduled Blocks.

  6. Press OK.

Auto Preschedule

Blocks can be prescheduled from a starting surface via the Flag Auto Preschedule icon. The starting surface must already be loaded into the Layers panel (bottom left).

Load a preschedule surface:

  1. Locate the Layers panel in the bottom left of the screen.

  2. Press the blue plus icon to import a new surface.

  3. Navigate to the samples folder and import the preschedule surface.

Automatically preschedule blocks above the surface:

  1. Press the Flag Auto Preschedule icon above the viewport.

  2. In the Preschedule with Surface window:

    1. choose the preschedule surface;

    2. set the minimum and maximum thresholds (values outside of threshold will be rounded up or down).

  3. Tick the records to be prescheduled. 

Â