RR. Settings

In the Settings section you may set units of measurements, options and thresholds to use in the project.

Enter all global settings to change the behaviour of the project.

Toggle the settings and values to control project behaviour

Select the units of measurement which match your site coordinate system and local standards.

Select your preferred units of measurement

Use the Quick Set dropdown to select Metric or Imperial units of measurement.

In the Options fields section you can configure parameters of your model.

Use Extensions	Toggle use of custom add-ins, such as external database queries
Use Block Model	Toggle use of block models for reserving
Fill Block Model Gaps	Option to fill voids in block models with a default material
Use Infrastructure	Module to account for some critical infrastructure areas such as heritage, environmental and bores. Needs custom Extension scripts.
Enable Dig Plans	Allow blast solids to be subdivided into dig blocks
Enable Single Destinations	Force one material type per dig block, for grade control blocks
Use External Grade Control Data Source	Connect to external grade control database
Block Model Expand Distance (m)	Visible block models are clipped to the Expand Distance around the current selection
Maximum Grade Block Overlap (%)	Error threshold for overlaps of imported grade control polygons

Volume Threshold (Minimum Volume)	Populates the Error List (in the Designer tab) with warnings for trivial blast volumes.
Sliver Threshold (Area / Perimeter)	Populates the Error list (in the Designer tab) with warning for boomerang-shaped blasts (batter trims).

Minimum Volume (m3)	Filters out solids below the minimum volume. Any solid whose volume is less than the defined value will be discarded. The maximum value is capped to 1000.
Minimum Area (m3)	Filters out solids below the minimum area
Sliver Threshold (Area / Perimeter)	Filters out solids below the minimum width
Sliver Maximum Area Threshold	For Alastri personnel only, field to be left as it is
Minimum Volume for Export	Filters out solids below the minimum volume

In the Hatch Patterns fields select a pattern from dropdown to outline different areas for phase exclusion, blasts or grade control.

Phase Exclusion Hatch	Set a pattern to show outside the polygon in Phase Exclusion Areas step. Area which is outside of the polygon is called “Phase Exclusion Area”
Invert Phase Exclusions Hatch	Toggle to show the pattern inside the polygon. Area which is inside the polygon is called “Phase Exclusion Area”
Designer - Editing Blast Hatch	Set a pattern to cover viewport in the Designer tab. Double click on the blast - it should clear pattern for blast selected
Designer - Grade Control Hatch	Set a pattern to show for the bench selected in the Designer tab when Force Excluded. Pattern should show for grade control flitches
Designer - Excluded Hatch	Set a pattern for excluded areas