TS. Waste Dumps

Overview

Waste Dumps names and capacities are automatically detected from the reserve database. Tables marked as "Dumps" will automatically list their contents and appear in bold blue.

Open

Waste Dumps step example overview

	Description	Example

	Description	Example
Name	Automatically added dumps (with the table type "Dumps" in the Create Tables step) will be displayed in bold blue, and dumps added from Haul Infinity or manually will be displayed in normal black text.	Open
Capacity	The capacity of dumps added from the database is filled in automatically and based on the dump solid volume. It should be the same as the solid volume specified in the Reserves tab/setup step. The capacity of the dumps added as dump points must be specified manually, allowing for a larger capacity.
Compaction Factor	Swell volume in the dump will be the compaction factor multiplied by the swell factor. So for compacted dumps, the compaction factor can be less than 1.0.

Adding point dumps

Haul Infinity Lift Entry nodes are treated as point dumps by the Scheduler. If you have any Lift Entries in Haul Infinity, you may add them to the Scheduler in this step.

Adding missing items from Haul Infinity

1. In Haul Infinity > Network tab check for nodes promoted as Lift Entry.

2. In ATS > Waste Dumps step press the Add Missing Items button.

3. Press OK to add all the missing items from Haul Infinity.

4. Added dump(s) will appear in the list.

   1. Specify Capacity and Compaction Factor, as required.

Adding missing items manually

1. In Haul Infinity > Network tab check for nodes promoted as Lift Entry.

2. In ATS > Waste Dumps step press the green plus button.

3. Rename the dump as per the node name in Haul Infinity.

   1. Specify Capacity and Compaction Factor, as required.